The forum is currently inactive due to too much AI spam.
KTH Beta Software
Quote from elmor on 2021-01-10, 11:43The KTH software works by communicating with the device over a serial port. Any EVC2 with firmware 0009 (to be released) will be able to work as a USB to Serial adapter. You can also use other USB to Serial adapters, for example FT23x or CH34x-based modules. The connection should be made to the KTH UART RX/TX pins with the cables swapped on the serial adapter. Eg KTH RX should be connected to the serial adapter TX and vice versa.
Release 1.0.0.5
- Add HWInfo export function
- Improved the Write to File function
Release 1.0.0.4
- Fixed Update LUT function
KTH 1.0.0.4: https://1drv.ms/u/s!Atmpv-6qHr_638gfJliwU85MKz0B2Q?e=r3YAjU
Release 1.0.0.3
- Fixed an issue with CSV logging not saving to the file
- Updated the monitoring graph to scale nicer
KTH 1.0.0.3: https://1drv.ms/u/s!Atmpv-6qHr_6084XUU2WLMbdvEPo2Q?e=OCm1kh
KTH-USB 1.0.0.3: https://1drv.ms/u/s!Atmpv-6qHr_62s5EITCnGZ6P3vK9QA?e=kuNvupRelease 1.0.0.2
- Added CSV logging functionality
KTH 1.0.0.2: https://1drv.ms/u/s!Atmpv-6qHr_6zdRaJepQctOIXXXmTg?e=rt9MfP
Release 1.0.0.1
- Added write temperature to file functionality (ex for OBS Studio integration)
KTH 1.0.0.1: https://1drv.ms/u/s!Atmpv-6qHr_6zb8QTuVq1BQAAIBTqA?e=94tStb
Release 1.0.0.0
- Initial release
- Missing logging to file and gain calibration features
KTH 1.0.0.0: https://1drv.ms/u/s!Atmpv-6qHr_6zZg3BanSWZ_q7EExBQ?e=cOwbsr
The KTH software works by communicating with the device over a serial port. Any EVC2 with firmware 0009 (to be released) will be able to work as a USB to Serial adapter. You can also use other USB to Serial adapters, for example FT23x or CH34x-based modules. The connection should be made to the KTH UART RX/TX pins with the cables swapped on the serial adapter. Eg KTH RX should be connected to the serial adapter TX and vice versa.
Release 1.0.0.5
- Add HWInfo export function
- Improved the Write to File function
Release 1.0.0.4
- Fixed Update LUT function
KTH 1.0.0.4: https://1drv.ms/u/s!Atmpv-6qHr_638gfJliwU85MKz0B2Q?e=r3YAjU
Release 1.0.0.3
- Fixed an issue with CSV logging not saving to the file
- Updated the monitoring graph to scale nicer
KTH 1.0.0.3: https://1drv.ms/u/s!Atmpv-6qHr_6084XUU2WLMbdvEPo2Q?e=OCm1kh
KTH-USB 1.0.0.3: https://1drv.ms/u/s!Atmpv-6qHr_62s5EITCnGZ6P3vK9QA?e=kuNvup
Release 1.0.0.2
- Added CSV logging functionality
KTH 1.0.0.2: https://1drv.ms/u/s!Atmpv-6qHr_6zdRaJepQctOIXXXmTg?e=rt9MfP
Release 1.0.0.1
- Added write temperature to file functionality (ex for OBS Studio integration)
KTH 1.0.0.1: https://1drv.ms/u/s!Atmpv-6qHr_6zb8QTuVq1BQAAIBTqA?e=94tStb
Release 1.0.0.0
- Initial release
- Missing logging to file and gain calibration features
KTH 1.0.0.0: https://1drv.ms/u/s!Atmpv-6qHr_6zZg3BanSWZ_q7EExBQ?e=cOwbsr
Uploaded files: