Forum breadcrumbs - You are here:ForumEVC2: User projectshelp with asus ares III
Please or Register to create posts and topics.

help with asus ares III

 hi i bought a couple of evc2 to play with but im trying to find documentation im a noob in this area but i wanted to know if i can use on this card

 

Uploaded files:
  • 20200811_173013.jpg
  • 20200811_172958.jpg
  • 20200811_173026.jpg
  • 20200811_173059.jpg

more pics

Uploaded files:
  • 20200812_125340.jpg
  • 20200812_125412.jpg
  • 20200812_125438.jpg
  • 20200812_125508.jpg
  • 20200812_125534.jpg

more pics

Uploaded files:
  • 20200812_125610.jpg
  • 20200812_125649.jpg
  • 20200812_125713.jpg
  • 20200812_125759.jpg
  • 20200812_125826.jpg

more pics

Uploaded files:
  • 20200812_125843.jpg
  • 20200812_125929.jpg
  • 20200812_125939.jpg
  • 20200812_130029.jpg
  • 20200812_130118.jpg

pics

Uploaded files:
  • 20200812_130157.jpg
  • 20200812_130212.jpg
  • 20200812_130221.jpg
  • 20200812_130317.jpg
  • 20200812_130328.jpg

pics

Uploaded files:
  • 20200812_130418.jpg
  • 20200812_130429.jpg
  • 20200812_130438.jpg
  • 20200812_130457.jpg
  • 20200812_130522.jpg

Looking for the i2c bus on the board which I believe is the 2 pass on the bottom right pins 24 and 25 lead to it

Uploaded files:
  • 20200812_212411.jpg
  • Screenshot_20200812-213739_Drive.jpg
  • Screenshot_20200812-213757_Drive.jpg

Looks good, I think this should be supported and auto-detect in the software. The pins should be the ones you indicated. You can also check if the headers are connected to SDA/SCL for an easier connection spot.

Uploaded files:
  • ares3_smb.png
  • ares3_headers.png

theres only continuity across pin 1 on j200 and both solder points on the opposite of what you have highlighted 

ok found the pins 🙂

Uploaded files:
  • 20200812_125438_LI.jpg