EVC2S

The EVC2S is an updated version of the EVC2. The features and accessories are modified based on user feedback and the USB interface is updated to use Type-C cabling. It has moved to a full surface mount process resulting in a better looking product. The devices still offers I2C/SPI/UART communication, a VMOD header and OLED display support.

Part number: EVC2S
Shop:
https://www.elmorlabs.com/index.php/product/evc2s/

AMPLE 20A Power Card

The AMPLE1P is a small 20A capable power card implemented using a single-phase step-down buck converter. It is designed primarily as a replacement for an existing under-powered or damaged power circuit on PC graphics cards. The output voltage can be controlled using the on-board variable resistor. By connecting it to an EVC2 device, the output voltage can be digitally monitored and controlled.

Part number: AMPLE1P
Shop: https://www.elmorlabs.com/index.php/product/ample-20a-power-card/

ROG_EXT I2C Module

ROG_EXT I2C Module

This small module allows you to communicate with your motherboard over regular I2C, using for example an Arudino, Raspberry Pi or EVC2. It requires an ASUS motherboard with a ROG_EXT header. The interface is compatible with the newer ROG Node header, but requires an adapter. Basic functionality includes reading fan speeds, temperatures, voltages, POST-codes and setting voltages and clock speeds. It can also emulate power, reset, safe boot or retry buttons and enable pause/slow mode.

Part number: REOM1A
Shop: https://www.elmorlabs.com/index.php/product/rog_ext-i2c-module/
Shop:
https://overlay.live/product/rog_ext-by-elmorlabs/

Discontinued products

EVC2

The EVC2 is the continuation of a personal project from 2013. It was originally designed for I2C communication over USB for digital voltage control of the most common graphics card voltage controllers. Compared to the first generation, the EVC2 has greatly improved functionality, speed and reliability. It now supports up to three separate I2C lines, one SPI interface (with adjustable supply/IO voltage), one UART port and an on-board DAC for analog voltage control.

Part number: EVC2N4
Shop:
https://www.elmorlabs.com/index.php/product/evc2/

P80DB1L LPC Debug Card

P80DB LPC Debug Card

The P80DB1L card allows you to display motherboard debug information sent to Port 80 on the LPC bus, even if there’s no such display on your motherboard. It uses an Altera/Intel Max V CPLD which decodes the debug data and displays them on a 7-segment display. The prerequisite is that there’s a TPM or LPC debug header on the motherboard. Pinouts of the card, cables and standard motherboard headers can be found here.

Part number: P80DB1L
Shop: https://www.elmorlabs.com/index.php/product/lpc-debug-card/